Checking The Connection To The Device - Softing TH LINK PROFINET Installation Manual

Chapter 7 - Configuring the device in the netw ork
7.4

Checking the connection to the device

You can check the device in the network when:
the device is integrated into the office and/or automation
network.
the device is energized.
the PC/notebook is in the office or in the automation network.
Procedure
Start a web browser on your PC/notebook.
For DHCP:
Enter the hostname http://THLINK-serial number (e.g.: http://
THLINK-143500067) and press Enter.
For manual IP configuration:
Depending on in which network your PC/notebook is installed,
enter the set IP address of the office or automation network
(basic setting: 169.254.0.1 bzw. 169.254.0.2) and press Enter.
The website of the TH LINK should be displayed in the web
browser now.
22
Note
You can define one TH LINK as a "parameter provider" if
more than one TH LINK are in use. Thus, all TH LINK
units can receive and save the parameters after login
(see Parameter distribution).
TH LINK PROFINET - Installation Manual