BEST ACCESS SYSTEMS Keypad EZ Quick Reference

Keypad EZ Quick Reference
To program a lock
1 To start programming, press
2 Enter the Administrator PIN or Supervisor
PIN, then press
3 Enter the command, then press #. For
example, to add a user, press
of commands, see the back side of this card.
4 Enter code 1 associated with the command,
then press #. For example, enter the PIN you
want to add:
5 Enter code 2 if required, then press #. For
example, enter the group for the PIN:
6 Repeat steps 3–5 to add more users, or to
complete other programming commands.
7 To end programming, press
Tips
I
To cancel a command sequence, press
This will let you start the command over.
I
Skipping a code and pressing
the default value, if it exists. See the
Keypad EZ Programming Guide for a list of all
default values.
#
. The default PIN is 9998.
1234#
.
00#
.
10#
. For a list
99#
.
#
will enter
1#
.
#
.
* *