Other Features; Installing The Latest Software; Setting The Sleep Timer; Using The Wireless Module - Philips HTS335W/12 User Manual

Installing the latest software

Periodically Philips will issue software
upgrades to enhance the user experience.
A
Get the software version of this unit by
pressing OPEN/CLOSE ç to open the
disc compartment
B
Press DISPLAY on the remote control.
Write down the information for your
current software version.
C
Visit the Philips website
'www.philips.com/support' to check the
availability of the latest software upgrade
and download the software to a CD-R.
D
Insert the CD-R to the disc tray.
The software starts to install on this
unit automatically.
Note:
Never unplug or turn off this unit
during the upgrade.
E
When the disc compartment opens,
remove the CD-R.
The software upgrading is in process.
F
Once complete, it turns off to standby
mode automatically.

Setting the Sleep timer

The sleep timer enables this unit to
switch to standby mode automatically at a
preset time.
Press SLEEP on the remote control
repeatedly to select a preset switch-off
time. (15, 30, 45, 60 minutes or OFF).
Before this unit switches to the
standby mode, a countdown of 60
seconds is displayed.
'SLEEP60' 'SLEEP 59'....
'SLEEP1' 'SLEEP'

Other Features

To cancel the sleep timer
Press SLEEP repeatedly to select 'OFF'
2
or press the (STANDBY-ON)
button.

Using the wireless module

A
The wireless transmitter is connected to
the WIRELESS TRANSMITTER
socket at the rear of the main unit.
B
Connect the rear speakers to the
matching speaker sockets at the bottom
of the wireless receiver.
C
Connect the power cable from the
wireless receiver to the AC power
outlet.
D
Turn on the main unit.
The wireless indicator on the wireless
transmitter and receiver light up.
Wireless
Receiver
Helpful Hint:
– For optimum wireless reception, ensure
the transmitter and receiver are not
obstructed by any objects.
Wireless
Transmitter
47