Unit installation and
configuration/Setting the signals
e)J LocateJandJselectJtheJoptionJCODING 1.
ThisJconfiguresJtheJcodingJparameters:J
MPEG2JorJmPEG4JLAyER2.
f)JJ
LocateJandJselectJtheJoptionJASPECT
RATIO. TheJpossibleJaspectJratioJvaluesJ
areJ1:1, 4:3 and 16:9.
g)J LocateJandJselectJtheJoptionJVIDEOJBI-
TRATE. TheJunitJcanJbeJconfiguredJforJaJ
dataJcodingJspeedJatJinputJofJ3Jto
8JMbits/s.
h)J LocateJandJselectJtheJoptionJAUDIOJ
BITRATE.JTheJunitJcanJbeJconfiguredJforJaJ
dataJcodingJspeedJatJinputJofJ96;J128;J160;J
192;J224;J256;J320JandJ384JKbits/s.
NoTE
IfJyouJkeepJpressingJtheJcontrolJbuttonJdownJyouJwillJaccessJtheJinformationJandJ
configurationJofJtheJfollowingJinputJsignals.
Configuration of the carrier services
1)
LocateJandJselectJtheJoptionJSERvICES.
2)
LocateJandJselectJtheJoptionJSERvICES andJ
theJnumberJcorrespondingJtoJtheJinputJyouJ
wantJtoJconfigure:J1JtoJ2JforJMACJ201JandJ1JtoJ
4JforJMACJ401.
a)J LocateJandJselectJtheJoptionJCH1 vIDEO
AUDIO. ActivateJ(ON)JorJdeactivateJ(OFF)J
theJvideoJandJaudioJsignalsJofJtheJfirstJ
input.
b)J LocateJandJselectJCH1 LCN. ConfigureJtheJ
LCNJvalueJofJtheJsignal.
c)J LocateJandJselectJCH1 SID. ConfigureJtheJ
SIDJvalueJofJtheJsignal.
d)J LocateJandJselectJCH1 NAmE.JAssignJaJ
nameJtoJtheJsignalJinJCH1.
42