Twin And Rack Configuration; Twin - Black Box Omni Tower CD107A-R4 User Manual

3.7 Twin and Rack Configuration

3.7.1 T
WIN
The Tower can be re-assembled as a twin tower. See Figure 3-7 on the next page,
and follow these steps:
1. Remove the base.
2. Separate the two halves.
3. Rotate the two sections 90 degrees.
4. Snap the two sections onto the two sections of the base.
A third mounting hole underneath each separate base is provided for extra
support for the twin tower using the unused bases adjustable feet or optional
casters.
Figure 3-6. Setting the SCSI Addresses.
OMNI TOWER
15