Table of Contents
Advertisement
OMNI TOWER
Connectivity
Module
SCSI bus B
input/output
Recorder
SCSI bus A
Figure 3-6. Front.
3.6 SCSI ID Settings
There are eight SCSI addresses (0–7) for any device on a SCSI bus. The host
adapter is always address 7. The PC's bootable hard drive, C:, may be SCSI address
0, and other SCSI devices attached to the host adapter must each have a unique
SCSI address between 1 and 6. A OMNI Tower, which includes 7 SCSI drives, must
be attached to a dedicated SCSI host adapter. Located on the back of each drive
cell tray are SCSI push button address switches for assigning SCSI addresses.
Set the SCSI addresses by pushing the small button below the switch address
indicator until the desired address appears in the window. The upper button
reverses the selection.
NOTE
SCSI IDs come preset on the drive cell trays in the chassis.
14
Advertisement
Table of Contents
