Connect Usb Device; Connect Power Cord - Philips HTS3276/98 User Manual

Connect portable media player
MP3
1
Connect a 3.5mm stereo audio cable (not
supplied) to the MP3 LINK jack on this
Home Theater System and the phone
jack on the portable media player (such as
MP3 player).
Note
•
To listen to the audio output from this connection,
press AUDIO SOURCE repeatedly until 'MP3 LINK'
is displayed on the display panel.

Connect USB device

1
Connect the USB device to
on this Home Theater System.
Note
•
This Home Theater System can only play/view MP3,
WMA, DivX (Ultra) or JPEG fi les that are stored on
such devices.
•
USB to access the content and play the fi les.
Press
16 EN

Connect power cord

•
•
1
USB jack
Warning
Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back or the underside of the Home Theater
System.
Before connecting to a socket, set the voltage
selector (at the rear or bottom of this Home
Theater System) to the local power line voltage. (For
HTS3371, HTS3378 only)
Connect the power cord to the socket
when all the required connections are
made.
The Home Theater System is ready to
»
be set up for use.