Olsson and Brothers UP WAY LUXURY SPORT 10 User Manual And Warranty page 16

Remarks: for those models with Bluetooth connection, Bluetooth pairing will be enabled if you press
and hold the ON button for 5 seconds. You can then connect to the Bluetooth with a Smartphone or
any device with a Bluetooth search function.
Playing music via Bluetooth allows you to listen to it on the Hoverboard speaker.
2.3 Basic Operation
Using the dynamic stabilisation principle, the Hoverboard features a built-in gyroscope and accel-
eration sensors to detect changes in posture in accordance with changes in the centre of gravity of
your body. It drives the motor with precision so that it can be correctly regulated via a servo control
system. When the centre of gravity is tilted backwards, the wheels also move backwards; to perform
a turn, decelerate and control the forward/back angle of the left/right foot as required, make the
centre of gravity tilt to the left to turn left and make the centre of gravity tilt to the right to turn right.
The built-in dynamic stabilisation inertia system can maintain the forward/back horizontal direction
but cannot maintain stability in the left-right direction. The user must slow down before turning the
Hoverboard to avoid injury due to centrifugal force.
Chapter 3 Tips on Control
3.1 Pedal sensors
The hoverboard has four sensors under the pedal. When you depress the pedal, the Hoverboard
automatically adjusts to the balanced mode.
While riding on the Hoverboard, be sure to step on the pedal as opposed to any other part of the
equipment.
Never place any object on the foot pad, otherwise the switch cannot be turned off. This will increase
the chance of collision and could result in personal injury or damage to the Hoverboard.
3.2 Display
The display is located on the top centre of the Scooter. It is used to display information.
Power display area: the green LED indicates a fully charged battery; the available power will be
reduced by 20% when the green LED turns yellow, and it will need to be charged.
Operating LED: When you activate the foot switch, the operating LED lights up. This indicates that
the system is running; when the system detects an error, the LED turns red.
Chapter 4 Safety
About the Use
We hope all users will enjoy using this Hoverboard safely.
It is strongly recommended that you read the User's Manual carefully before using the Hoverboard
for the first time. Before each ride, check to see if the wheels are damaged or if any components
have become loose. If there is anything abnormal, contact your local distributor.
Do not tamper with any part of the Hoverboard; this can impair performance, cause damage and
potentially result in serious injury.
4.1 Weight Limitations
Reasons why the weight limitations must be respected: 1. To ensure the safety of the user; 2. To
prevent damage to the Hoverboard due to overloading.
Maximum Weight: 100kg
Minimum Weight: 20kg
WARNING! Overloading can cause the rider to fall or result in damage to the equipment
16