Related Manuals for Bebehut Trio-Fix
Summary of Contents for Bebehut Trio-Fix
- Page 1 BEBEHUT Trio-Fix User Manual Universal Group 1, 2, 3 Child of mass from 9kg to 36kg (approx. age 9 months - 12 years old)
- Page 2 ISOFIX Universal group 1 (9-18kg): ISOFIX + top tether + 5-point harness NOTICE This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04 series of amendments (ECE R44) for general use in vehicles fitted with ISOFIX anchorages systems. ...
- Page 3 Universal Group 2/3 (15-36kg): 3-point vehicle safety belt NOTICE This is a "Universal" child restraint. It is approved to Regulation No. 44, 04 series of amendments (ECE R44), for general use in vehicles and it will fit most, but not all, car seats. ...
- Page 4 1 APPLICABLE USAGE IN VEHICLE This child car seat is designed for child group 1, 2 and 3 (weight from 9 to 36kg). It should be installed in the following way: Child group Weight Installation Category 9 – 18kg ISOFIX + top tether + 5- ISOFIX Universal point harness 15 –...
- Page 5 2 WARNING Please carefully read through the manual, operate accordingly and keep the manual in the pocket of child seat back for future use. Treatment for the protection of child and other passengers. This product is designed solely for the use in vehicle. DO NOT use it in other places (like home). ...
- Page 6 3 PRODUCT SPECIFICATION...
- Page 7 4 ADJUSTABLE COMPONENT 4.1 Adjust 5-point harness Note: Before the adjustment, please make sure that headrest adjustment handle is at the lowest level. 1. Pull out the shoulder belt while pressing down the harness belt adjuster to completely loosen the 5-point harness.
- Page 8 2. Grip the headrest adjustment handle and slide up and down to select optimal height. Make sure the headrest safety belt guide is slightly higher than the child’s shoulder. Release the handle and gently shake the headrest to make sure the headrest is completely locked in.
- Page 9 4.4 Remove 5-point harness 1. Loosen 5-point harness and open the shoulder belt height adjuster (see section 4.1). Take off and pull out shoulder belts from the harness belt connector and shoulder belt height adjuster rod. 2. Take off shoulder belt pads and store them in the gap between child car seat base and backrest.
- Page 10 2. Insert two ISOFIX guides into the gap of vehicle seat and lock them ISOFIX anchorage respectively. Use the ISOFIX guide provided along with the child car seat if it is not provided by car manufacturer. 3. Completely slide out two ISOFIX attachments by simultaneously pressing both buttons ISOFIX adjuster.
- Page 11 6. Remove the baby seat pad if the child is over 13kg. Open the 5- point harness by heavily pressing the red button on harness buckle. Fit the child into the child car seat and check if the height of the shoulder belt suits (see section 4.1 for adjustment of 5-point harness).
- Page 12 2. Adjust headrest. (see section 4.2) 3. Remove baby seat pad. Follow step 1, 2 & 3 in section 5 to lock the child car seat to vehicle’s ISOFIX anchor points. Let the child sit in the child car seat and recheck the height of the headrest (see section 4.2 for adjustment).
- Page 13 7 CHILD GROUP 2 & 3 (15-36kg): 3-POINT VEHICLE SAFETY BELT 1. Remove 5-point harness (see section 4.4). 2. Adjust headrest (see section 4.2). 3. Remove baby seat pad. Put the child car seat on vehicle seat and make sure it is stably contacted with vehicle seat.
-
Page 14: Care And Cleaning
8 CARE AND CLEANING Regularly check important parts for malfunction. Make sure mechanical components are always working properly. DO NOT let any parts of the child car seat be stuck by vehicle door, vehicle seat frame or other object.
Need help?
Do you have a question about the Trio-Fix and is the answer not in the manual?
Questions and answers
Do you have a manual for this car seat. It has Reference BAB001G on the box. Image attached