Flaming River FR1003 Installation Instructions

Warning
Contact the original manufacturer of the vehicle to determine if this
switch is approved for your application. Flaming River Industries,
Inc. makes no recommendation as to mounting location or suitability
to your application. However, when installed this switch is function-
ing part of the electrical system. It should be treated as a battery
terminal. Covers are not furnished with this product but are recom-
mended. Flaming River part number FR1003TM.
Because of their intended usage, the manufacturer makes no warran-
ties whatsoever expressed or implied, oral or written, to purchasers of
their products regarding performance, safety, fit, merchantability or
length of service. Purchasers are responsible for selection of proper
goods and must rely on their own skill and judgement that such
goods are suitable for the purchaser's application.
The Big Switch
Part No. FR1003

Installation Instructions

Warranty Disclaimer
"The Big Switch" is a durable,
heavy duty waterproof discon-
nect switch. It is designed to
completely shut–off current
flow from the battery of any
engine-powered vehicle or
electronically-powered acces-
sory system. Rated at 250 amps
at 12V and 24V for continuous
service (2,500 amps for 5 sec-
onds). " The Big Switch" is ap-
plicable to virtually any 6, 12 or
24 volt electrical system. It can
be used as an emergency cut-
off switch, anti-theft device, or
a simple on/off switch.