Download Print this page

Teleste Divace Solo Installation Card

Digital interactive audio video recorder

Advertisement

Quick Links

Three Ways to Install Headset Adapter
1. Leave it on the table top beside computer.
2. Install it with screws under the table top.
3. Install it with the Desk Top Housing (accessory).
1.
2.
Divace Headset Adapter
Installation
Headset Installation
The Headset Adapter has four headset sockets:
two in front and two inside the Headset Adapter.
To install headset(s) inside the Headset Adapter
you have to cut a hole in the plastic cover for
headset cable(s) to pass through.
Headset Installation on Rear Panel
Open the plastic cover by removing the two
screws on the bottom.
Attach headsets to connectors inside the
Headset Panel.
Cut a hole in the thin plastic cover for headset
cable(s) to pass through.
Made by
Educational
3.
J11
LAB
Stand Alone
J5
1
1-2 = 3 mV
2-3 = 30 mV
OFF = 200 mV
Diva
c
e Solo
Digital Interactive
Audio Video
Recorder
The Divace Solo Headset Adapter
Installation Step by Step
1.
Install the Divace Solo software
Install the Divace Solo software according to the Divace User Manual.
2.
Connect Headset Adapter cable to sound card
Connect the Headset Adapter cable to sound card and configure jumpers inside
the Headset Adapter, see the paragraph "Divace Headset Adapter Installation".
3.
Adjust computer sound card mixers
The Divace Solo computer sound card mixer should be preadjusted to achieve
best audio performance, see the paragraph "Computer sound card mixer
adjustment".
At the end of the adjustment procedure the sound card setting file DIVACE.CFG
and map file mixer_name.CFG are created and saved on the Divace Solo
installation directory.
If more than one Divace Solos are installed at time, do the following:
Instead of adjusting every sound card individually, you can copy both CFG files
into other student computers' Divace Solo installation directories,
cards are of the same type
4.
Install Divace Headset Adapter
Connect headset(s) to Headset Adapter. See the paragraph "Divace Duo
Headset Adapter Installation".
Install Headset Adapters to student furniture. See the paragraph "Three ways to
install Headset Adapter".
Made by
Educational
Installation
Card
if all sound
.
Code:1850868

Advertisement

loading

Summary of Contents for Teleste Divace Solo

  • Page 1 Adjust computer sound card mixers two in front and two inside the Headset Adapter. The Divace Solo computer sound card mixer should be preadjusted to achieve To install headset(s) inside the Headset Adapter best audio performance, see the paragraph "Computer sound card mixer you have to cut a hole in the plastic cover for adjustment".
  • Page 2 1. Close the Divace Solo application to assure that it is not running. Headset Adapter. 2. Start recording by pressing the record 2. Insert the Divace Solo CD into computer. Cancel the Divace Solo installation wizard by clicking the button and speak about 4 sec. Cancel button.