Dismantling
Removing the motor
Remove
1. Remove the face plate, rear cover and front cover.
2. Remove the setscrews (A) and its nuts and lift away the
machine socket (D).
3. Disconnect the Lamp cable (M).
4. Remove the setscrews (C) and motor (G) .
Mount
• To attach the motor, follow the above procedure in re-
verse.
A
Adjusment
1. Slightly loosen the setscrews (C).
2. While pushing the middle of the motor belt with a
300 grams load, move the motor up or down so that
the belt deflects 7 to 9 mm.
3. Tighten the setscrews (C) securely.
M
7 - 9 mm
300 grams
C
36
Singer Inspiration