Download Print this page

Sealey SA38.V2 Instructions page 3

Air riveter

Advertisement

6. MAINTENANCE
WARNING! Ensure you disconnect the tool from the air supply system before attempting any service or maintenance.
p
6.1.
Maintain the tool with care.
6.2.
Lubricate the air tool daily with a high quality air tool oil (Sealey No. ATO/500 or ATO/1000) either via an oiler in the air supply
system or by placing a few drops into the riveter air inlet immediately before use.
6.3.
Store the tool in a safe, dry, secure environment.
6.4.
Factors that may inhibit performance:
Loss of power or erratic action may be caused by reduced compressor output, an excessive drain on the air line, moisture or
restrictions in air pipes or the use of hose connections of incorrect size. Grit or gum deposits in the tool may cut power and can be
corrected by flushing out the tool with gum solvent oil or an equivalent de-greaser. If all external conditions are in order, disconnect
the tool from the air supply, disassemble and replace any worn or damaged parts with Sealey original parts. Clean all parts,
reassemble and lubricate. Alternatively, take the tool to your nearest authorised service agent.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
01284 703534
sales@sealey.co.uk
SA38.V2
Issue: 2 - 07/11/14

Advertisement

loading