Basic Vcr To Television Connection; Using The Front Audio/Video Inputs - Philips 19PR16C Directions For Use Manual

H U
OOKING
T
he basic Antenna, or Cable TV,
to VCR to TV connection is
shown to the right. For more infor-
mation on other hookups (possible
when Cable Converter/Descrambler
boxes are included) refer to your
accessory VCR and Cable
Converter Owner's Manual for
details.
Connect your Antenna or Cable
TV signal to the IN FROM
ANT(enna) plug on the VCR.
Connect the OUT TO TV plug on
the VCR to the 75Ω plug on the TV
(connecting cable supplied with the
VCR.)
Outdoor
VHF/UHF
Antenna
Cable TV signal
F A/V I
RONT
A udio and Video Front Mono inputs
are available for a quick connection
of a VCR or to playback video from a
camera. Use the AV button on the
remote to tune to the Front A/V Inputs.
Connect the yellow video cable from
the Video output on the VCR/Camera to
the Video input located on the FRONT of
the TV.
Connect the audio cables (red and
white) from the Audio outputs on the
VCR/Camera to the Audio input located on
the front of the TV. Note: The use of the
"Y" adapter will have to be used if the
VCR or Camera has stereo audio outputs.
Y TV (B
P OUR
300 to 75Ω
Ohm Adapter
OR
IN FROM ANT.
NPUTS
1
TV VCR C
ASIC TO
1
OUT TO TV
Audio Cable
Video Cable
ANTENNA
OUT OUT 2
IN
ANTENNA
AUDIO VIDEO
OUT
IN IN
VCR or accessory device
7
ONNECTIONS
75
75
Round Cable
75Ω Supplied with VCR
Front A/V Mono Input Jacks
AUDIO
VIDEO INSTALL/MENU
– VOLUME +
Front of TV
)
2
Back of TV
CHANNEL
VIDEO AUDIO INSTALL/MENU
– VOLUME + CHANNEL