Advertisement
STEP 7. Place the wooden top (N) face down
on a flat, clean, smooth surface. Place the
cabinet upside down on the wooden top and
align it with the four pre-drilled holes. Fix with
the four hex head screws (S). Screw into place
the four adjustable leg levelers (R).
STEP 10. Put shelf component (K) into place at desired
height inside cupboard.
Sole UK Distributor, Sealey Group,
Bury St. Edmunds, Suffolk.
STEP 8. Bolt the four corner braces (I) into
place using 16 bolts (O), 16 lock washers (P),
and 16 nuts (Q).
Place the finished workbench in its final location and adjust the leg levelers so that
the bench is both level and stable in use.
01284 757500
STEP 9. Bolt one shelf part (K) to the underside
of the cupboard compartment as indicated
above using 4 bolts (O), 4 lock washers (P),
and 4 nuts (Q). Tighten all fixings and turn
workbench the right way up.
01284 703534
E-mail: sales@sealey.co.uk
AP2010 - 1 - 180102
Advertisement
