Table of Contents
Advertisement
Problem:
Excessive noise
Solution:
Troubleshooting
Check the Water Tank to make sure it is properly seated on
•
the Base.
Check the Water Tank to make sure there are no bubbles
•
when the Water Tank is full and running. if there are bubbles, turn
the unit OFF until the bubbling stops. When the bubbling has
stopped, set the unit to the desired speed.
Problem:
Humidifier will not turn on
Solution:
Make sure the unit is plugged in and Adjustment Knob is set
•
to ON and the indicator light in the base is illuminated.
Problem: Humidifier shuts off
Solution:
Make sure Water Tank has water in it.
•
Clean Water Float. Refer to the "Cleaning" section on page 5.
•
Problem:
White dust or mineral build-up on the unit
Solution:
Refer to the "Cleaning" section on page 5.
•
Problem:
Humidity output and water usage decreased
Solution:
Check the Adjustment Knob to make sure it is set to the
•
desired humidity level and speed.
Check the Water Tank to make sure there are no bubbles
•
when the Water Tank is full and running. If there are bubbles, turn
the unit OFF until the bubbling stops. when the bubbling has
stopped, set the unit to the desired speed.
Clean any components that have mineral build-up. Refer to
•
the "Cleaning" section on page 5.
Check the Fan Vent and remove any obstructions.
•
Problem:
Humidifier produces a strange odor
Solution:
Refill Water Tank with fresh water.
•
Be sure to perform regular maintenance.
•
Troubleshooting
7
Advertisement
Table of Contents
