Troubleshooting - Eastwood L6700 Instructions Manual

Large view auto darkening welding helmet
Table of Contents

Advertisement

TROUBLESHOOTING

Auto-Dimming
Does Not
Function
(will not
darken)
Slow Re-
sponse for
Darkening
Poor Vision
Through Lens
Helmet Slips
During Use
"Low-Bat"
Indicator
Glows
To order parts and supplies: 800.343.9353 >> eastwood.com
Dirt may be
blocking sen-
sors located at
upper area of
the lens
assembly
Batteries
may be low
Dirt may be
blocking solar
cells at upper
portion of
viewer area
Operating
temperature
too low
Sensitivity set-
ting may need
adjustment
Dirt or exces-
sive pitting may
be blocking
view
Helmet fit
not adjusted
properly
Batteries
require
recharging or
replacement
Clean lens assembly.
Expose the solar cells to bright light source to
recharge.
Clean lens assembly.
Do not use below 23°F (-5°C).
Follow "Sensitivity" section in instructions for
adjustment procedure.
Clean lens assembly.
Follow fit adjustment steps in instructions.
Replace with two CR2450 Batteries or Recharge
Batteries per Battery Recharge/Replacement
procedure in preceding Maintenance section.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents