Rear Panel Jacks; Connecting A Vcr Or Laserdisc Player - Philips 60PP9401 Directions For Use Manual

VCR L
OR ASERDISC
F
ollow the steps shown here to
connect a stereo VCR or
stereo laserdisc player.
Connect the cable from the
VIDEO OUT of the VCR or the
laserdisc player to the TV's AV
(VIDEO) jack.
Connect the cable from the
AUDIO OUT R of the VCR or the
laserdisc player to the AV
(AUDIO/R) jack.
Connect the cable from the
AUDIO OUT L of the VCR or the
laserdisc player to the AV
(AUDIO/L) jack.
Press the SOURCE button
until you access the input source to
which you have connected the VCR
or laserdisc player.
Press the SOURCE button
until you return to the previous
channel. Or press the A/CH button
to return to the previous channel.
CHECK IT OUT
Completely insert the connec-
tion cord plugs when hooking up
the Rear Panel jacks. The picture
and sound that are played back will
be abnormal if the connection is
loose.
A single VCR can be used for
VCR #1 and VCR #2. Note, how-
ever, that a VCR cannot record its
own video or line output. (See the
setup on page 26.) Refer to your
VCR operating guide for more
information on the line input–out-
put connections.
R P J
EAR ANEL
Back of VCR
or Laserdisc
V L R
Player OUTPUT
VCR or Laserdisc
Player
NOTE: If your VCR
or laserdisc player is
monaural (mono),
connect its audio
output jack to the
TV's AUDIO/L jack.
27
ACKS
TV's Rear Panel
SOURCE
TV DVD VCR ACC
LIGHT
HELP FORMAT
SWAP PIP CH SOURCE FREEZE
– +
PIP POSITION PIP ON/OFF
MENU/
STATUS/
SELECT
EXIT
VOL
CH
1 2 3
4 5 6
7 8 9
0
A/CH
SURF
TUNER A TUNER B FRONT
AV1 AV2 AV3 AV4