Download Print this page

Alarm.Com ADC-CSVR126 Quick Start Manual

Stream video recorder

Hide thumbs Also See for ADC-CSVR126:

Download this manual

STREAM VIDEO

RECORDER

QUICK START GUIDE

SMARTER

ADC-CSVR126

VIDEO

SOLUTIONS

Need help?

Do you have a question about the ADC-CSVR126 and is the answer not in the manual?

Page 1 STREAM VIDEO RECORDER QUICK START GUIDE SMARTER ADC-CSVR126 VIDEO SOLUTIONS...
Page 2: Pre-Installation Checklist
HDMI or VGA cable (optional) • Ethernet connection to broadband (Cable, DSL or Fiber Optic) Internet • A computer or mobile device with Internet access • Login and Password for the Alarm.com account to which you will add the SVR Quick Start Guide...
Page 3 Adding the Device to an Alarm.com Account LED Reference Guide Using an Ethernet cable, connect the device to the network. If you wish to use a display with your SVR, please connect it now Power LED using either an HDMI or VGA cable.
Page 4 F R O N T O F S V R B AC K O F S V R Power LED Status LED MENU HDMI POWER SWITCH POWER Network (Tx/Rx) LED CONTROL PAD POWER INPUT ADC-CSVR126 Stream Video Recorder Quick Start Guide...
Page 5 Power switch on the back of the device to the Off position. When prompted, enter the password you created for the device during the Alarm.com setup process. • Alternative method: If the device is not attached to a display...
Page 6: Troubleshooting
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. ADC-CSVR126 Stream Video Recorder Quick Start Guide...