Subscribe to Our Youtube Channel
Related Manuals for Pepperl+Fuchs ODT-HH-MAH120-HD
Summary of Contents for Pepperl+Fuchs ODT-HH-MAH120-HD
- Page 1 FACTORY AUTOMATION MANUAL ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD HANDHELD - HIGH DENSITY...
- Page 2 ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD With regard to the supply of products, the current issue of the following document is ap- plicable: The General Terms of Delivery for Products and Services of the Electrical In- dustry, published by the Central Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most recent version as well as the...
-
Page 3: Table Of Contents
Symbols relevant to safety ....................7 Intended use ........................7 General notes on safety.....................7 Disposal ..........................7 Product description ....................8 ODT-HH-MAH120-HD - use and application ..............8 Field of vision and resolution ...................8 Indicators and control elements ..................9 Accessories ........................10 4.4.1 Connecting cable........................10 Installation ......................11... - Page 4 ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Contents Optimizing the handheld ..................16 Programming different code symbologies ..............16 7.1.1 Aztec ..........................16 7.1.2 Codabar ..........................16 7.1.3 Codablock F ........................16 7.1.4 Code 11 ..........................17 7.1.5 Code 39..........................17 7.1.6 Code 93..........................18 7.1.7 Code 128..........................18 7.1.8 Composite ..........................18 7.1.9 Data Matrix.........................19 7.1.10 GoCode..........................19...
-
Page 5: Introduction
Introduction Introduction Congratulations You have chosen a device manufactured by Pepperl+Fuchs. Pepperl+Fuchs develops, produces and distributes electronic sensors and interface modules for the market of automation technology on a worldwide scale. The most important instructions can be found in the following chapters: •... -
Page 6: Declaration Of Conformity
This product was developed and manufactured under observance of the applicable European standards and guidelines. Note! A Declaration of Conformity can be requested from the manufacturer. The product manufacturer, Pepperl+Fuchs GmbH, D-68307 Mannheim, has a certified quality assurance system that conforms to ISO 9001. ISO9001... -
Page 7: Safety
If serious faults occur, stop using the device. Secure the device against inadvertent operation. In the event of repairs, return the device to your local Pepperl+Fuchs representative or sales office. When packing the device for storage or transport, use materials that will protect the device from bumps and impacts and protect against moisture. -
Page 8: Product Description
Product description ODT-HH-MAH120-HD - use and application The ODT-HH-MAH120-HD is a robust and inexpensive handheld for all standard bar codes and 2D codes. The Megapixel-CMOS image sensor facilitates in conjunction with the specially developed optical system an extremely large reading range, relating to both the reading distance and the image window. -
Page 9: Indicators And Control Elements
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Product description Indicators and control elements Status LED Camera, lighting LEDs Trigger button 8-pin connecting jack Reading Confirmation from handheld The following table contains all the confirmation indicatiors which are communicated by the handheld by means of LED, tactile and acoustic signals. -
Page 10: Accessories
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Product description Accessories Various accessories are available. 4.4.1 Connecting cable The following connecting cables are available as an option: Designation Description ODZ-MAH-CAB-B14 Connecting cable USB interface, length approx. 180 cm ODZ-MAH-CAB-B14-3.7m Connecting cable USB interface, length approx. -
Page 11: Installation
2. Check that all items are present and correct based on your order and the shipping documents. If you have any questions, please contact Pepperl+Fuchs. 3. Keep the original packing material in case you need to store or ship the unit at a later time. -
Page 12: Connection Via Usb
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Installation 4. Use a srewdriver and the screws provided to fasten the protective cap onto the bottom of the handle. 5.2.1 Connection via USB Connecting USB connecting cable to computer 1. Insert the USB plug of the connecting cable in a free USB port on your computer. This can be done during operation. -
Page 13: Connection Via Rs 232
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Installation 5.2.2 Connection via RS 232 Connecting RS 232 connecting cable to computer 1. Power off the computer. 2. Connect the RS 232 plug of the connecting cable to the RS 232 port of the computer. 3. Connect the low-voltage plug of the power-supply unit to the low-voltage jack of the RS 232 connecting cable. -
Page 14: Connection Via Ps/2
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Installation 5.2.3 Connection via PS/2 Connecting PS/2 connecting cable to computer 1. Power off the computer. 2. Disconnect the connection to the computer if an external keyboard is connected to the computer. 3. If you are using a USB keyboard, connect the keyboard with an appropriate adapter to the PS/2 connecting jack of the connecting cable. -
Page 15: Commissioning
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Commissioning Commissioning Positioning and reading techniques This handheld uses digital camera technology to record an image of the code to be read. After an image has been recorded, the handheld uses highly developed evaluation procedures to evaluate the data contained in the recording. -
Page 16: Optimizing The Handheld
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld Optimizing the handheld Programming different code symbologies Note! Code Save Settings Always scan the code Save Settings after reading a configuration code. Thus the configuration code is saved permanently. 7.1.1 Aztec Aztec On Aztec Off (Default) -
Page 17: Code 11
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.4 Code 11 Code 11 On (Default) Code 11 Off Code 11 Checksum 1 Code 11 Checksum 1 Code 11 Checksum 2 Save Settings digit digit & Strip from result digit & Strip from result Example: 7.1.5... -
Page 18: Code 93
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.6 Code 93 Code 39 On (Default) Code 93 Off Save Settings Example: 7.1.7 Code 128 Code 128 On (Default) Code 128 Off Code 128 Short Margin On Code 128 Short Margin Off Save Settings... -
Page 19: Data Matrix
GoCode is a private symbology and can be used by obtaining a fixed-term license. GoCode has many important advantages when compared with usual linear bar codes and 2D symbols. Please contact Pepperl+Fuchs if you require any further information on the advantages of a private symbology. -
Page 20: Interleaved 2 Of 5
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.11 Interleaved 2 of 5 Int 2 of 5 On (Default) Int 2 of 5 Off Int 2 of 5 Two Digits On Int 2 of 5 Two Digits Off (Default) Int 2 of 5 Four Digits On... -
Page 21: Micro Pdf417
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.14 Micro PDF417 Micro PDF417 On Micro PDF417 Off (Default) Save Settings Example: 7.1.15 MSI Plessy MSI Plessy On MSI Plessy Off (Default) Save Settings Example: 7.1.16 NEC 2 of 5 NEC 2 of 5 On... -
Page 22: Pharmacode
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.18 Pharmacode An explanation of the Pharmacode settings and all programming codes can be obtained from Pepperl+Fuchs. 7.1.19 Post Codes All post codes (zipcodes) are deactivated as standard. Scan the following codes to activate the corresponding post symbology. -
Page 23: Qr Code
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.20 QR Code QR Code On QR Code Off (Default) Enable Checksum Disable Checksum (Default) QR Code Inverse On Both Inverse and Standard On All QR On (includes Micro QR) Inverse QR and Micro QR On... -
Page 24: Telepen
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.1.22 Telepen Telepen On (Default) Telepen Off Save Settings Example: 7.1.23 UPC/EAN/JAN UPC On (Default) UPC Off UPC Short Margin Enabled UPC Short Margin Disabled (Default) UPC Extension On UPC Extension Off Save Settings... -
Page 25: Optimization Of The Decoding Performance
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld Optimization of the decoding performance 7.2.1 Reading high-density data matrix codes This handheld is suitable for reading very small data matrix codes with an extremely high information density (high-density data matrix codes). Note! Note the color of the illumination LEDs. -
Page 26: Handheld Configuration
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld Handheld configuration Locking handheld to prevent modifications to settings Once you have adjusted all the necessary settings of the handheld, you have the option of locking the settings to prevent further modifications. To do so, proceed as follows: 1. -
Page 27: Usb Operating Modes
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.1 USB operating modes Changing USB operating modes There are 3 operating modes for USB operation of the handheld. To change the USB operating mode, scan the relevant code in the following table. USB Keyboard Mode Scan this code to transmit all the scanned data from the handheld to the computer. -
Page 28: Rs 232 Operating Modes
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.2 RS 232 operating modes Changing RS 232 communication parameters Scan the respective code to change the individual RS 232 connection settings. RS 232 communication settings Setting data bit 7 data bits 8 data bits (default) -
Page 29: Volume And Vibration Setting
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.3 Volume and vibration setting Vibration mode Vibration & Beep on Vibration on/Beep off Vibration off/Beep on (Default) Volume mode Beep off Beep low Beep High (Default) Scan the code Save Settings after selection: 7.3.4... -
Page 30: Continuous Reading
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.5 Continuous reading In addition to the option of pressing the trigger button to start a reading, you also have the option of using the reader in continuous mode and perform an unlimited number of readings. -
Page 31: Lighting
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.6 Lighting Activating continuous lighting Deactivating continuous lighting Scan the code Save Settings after selection: 7.3.7 Keyboard settings US English Keyboard - No US English Keyboard - US English - ctrl+char for leading 0 (Default) -
Page 32: Mirror Decoding
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.8 Mirror decoding As soon as you activate mirror decoding, the handheld can read codes that have been inverted. Furthermore, all other code reading functions are deactivated. Activating/Deactivating mirror decoding 1. To activate mirror decoding, scan the code Mirroring on: 2. -
Page 33: Prefix And Suffix Settings
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.9 Prefix and suffix settings Caution! Risk of data loss If you scan one of the following codes, data loss may result First save the settings on your handheld before scanning one of the following codes. - Page 34 ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld Defining suffix For presentation of the read data, we recommend - besides the use of prefixes - the use of suffixes as separators between the individual data records. You can select between several separators. Combining several separators is also possible (e.g. a comma followed by a space, followed by the data record).
-
Page 35: 10Text Command Function
ODT-HH-MAH120-HD & ODT-HH-MAH120-WH-HD Optimizing the handheld 7.3.10 Text command function Activating/deactivating text command function Scan one of the following codes to activate or deactivate the text command function. Activate text command Deactivate text command (default) Scan the code Save Settings after selection: 7.3.11... -
Page 36: 12Information On Firmware And Serial Number Of The Reader
Information on firmware and the serial numbers of the reader is transferred from the internal reader memory and displayed in the text editing program. Note! Current firmware and upgrades Pepperl+Fuchs regularly releases new firmware for readers. Contact Pepperl+Fuchs for information on current firmware versions or upgrades. - Page 37 SENSING YOUR NEEDS Pepperl+Fuchs sets the standard in quality and innovative technology for the world of automation. Our expertise, dedica- tion, and heritage of innovation have driven us to develop the largest and most versatile line of industrial sensor technolo- gies and interface components in the world.
Need help?
Do you have a question about the ODT-HH-MAH120-HD and is the answer not in the manual?
Questions and answers