Program Sort; Manual Store; Other Settings In The Install Menu - Philips 17PF9220/58 Handbook

LC04C2~1.1GB.qxd 7/27/05

Program sort

& Press the
MENU
displayed on the screen.

Manual store

This menu is used to store the programmes
one at a time.
& Press the MENU
é With the cursor, select the Install menu then
Manual store:
TV Menu
Picture
Sound
Features
Install
" System: select
or Western Europe
Europe (DK standard), United Kingdom
(I standard) or France (LL' standard).

Other settings in the Install menu

& Press the
MENU
menu:
é Language: to change the display language for
the menus.
" Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select ". . ."
' Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes.
6
2:04 AM Page 6
key. The TV Menu is
key.
Manual Store
System
Search Europe
Í Æ
Program No.
Fine Tune
Store
Europe (automatic detection*)
(BG standard), Eastern
key and select the Install
é With the cursor, select the Install menu
followed by the Sort menu.
" Select the programme you want to move
<>
using the keys and press
<>
' Then use the keys to select the new
number and validate with
( Repeat steps " and ' for each program you
wish to renumber.
§ To quit the menus, press
* Except for France (LL' standard), you must select
choice France.
' Search: press . The search starts. Once a
9
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
directly using the to
0 9
If no picture is found, consult the possible solutions (p. 15).
( Program No.: enter the required number
89
with the or to
0 9
§ Fine Tune: if the reception is not satisfactory,
89
adjust using the keys.
9
è Store: press . The program is stored.
! Repeat steps ' to è for each programme to
store.
ç To quit the menus, press
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the
9
keys and validate with
search, press MENU . If no picture is found, consult
the possible solutions (p. 15).
( Name: If required, you can give a name to the
programmes and external connectors. Use the
89
keys to move around the name display area
<>
(5 characters) and the
characters. When the name has been entered,
8
use the key to exit. The name is stored.
Note: on installation, the programs are named
automatically when an identification signal is sent.
§ To quit the menus, press
.
9
.
8
Ë
.
keys.
keys.
Ë
.
<>
. To quit or interrupt the
keys to select the
Ë
.