Recording Function - Philips 32DW6558/01 Handbook

Recording function

This feature enables you to program a digital
recording and control the VCR (if it has an
EasyLink feature and is connected to EXT2).
If your video recorder is not equipped with
Easylink, the TV will provide a digital channel
to be recorded.You will still need to program
your video recorder.
Important:The video recorder must be connected
to EXT2. Please note that it is NOT possible to record
one digital channel and watch another digital channel
at the same time.You can however record a digital
channel and watch an analogue channel on your TV, or
vice versa. Philips recorders with only the TV link
feature do not support easy recording : you wil still
have to program your VCR.
& From digital mode, press the
the TV guide.
é Press the
key to call the Record menu.
RED
2 BBC 2
Service
Enter your pin code if locked
Day & Month
Start time
End time
Audio language
Subtitle language
Please enter the preset number.
Store
Ïî
" Use the
keys to select a setting and
¬
press to enter into the sub-menu. Make
your adjustment and press
• Service : you can change the number of the
programme you want to record. Press
confirm.
• Enter your pin code if locked : enter your
secret code only if you have activated the
access restriction feature (see p.7). Press
to confirm.
10
o
key to display
11:46
2 BBC 2
16/02
12:15
12:30
English
none
Close Cancel
u È
or to exit.
u
to
u
• Day & Month : enter the date by using the
09 @ #
or P keys. Press
• Start time : enter the start time.
• End time : enter the end time.
• Audio language : select your language and
u
confirm with .
• Subtitle language : make your selection and
u
confirm with .
• Subtitle for hearing impaired : select
or and confirm with
No
• Occurence : select
u
and confirm with .
' Press the
key to store your recording.
RED
The TV guide reappears.
You can press the
GREEN
recordings you have set.
( If your video recorder is not equipped with
Easylink feature, remember you still need to
program it.
§ If you have finished watching television, you must
leave it in standby in order for the recording
program to be activated.
Important: never switch off the TV with the power
button when a recording has been programmed,
but use the standby key on the remote control.
è If you wish to continue watching another
digital channel after setting a timer, you can do
so by changing channels in the normal way.
! If you are watching another digital channel when
the timer is due to start, the timer alarm will sound
and present you with the option of switching
channels or continuing to watch the current
channel.
ç You can also watch analogue channels while
recording digital channels. Press the
switch the TV to analogue mode.
The moment a timer start, you get a warning
message and you can still decide to stop recording.
u
to exit
Yes
u
.
, or
Once Daily Weekly
key to display the list of
v
key to