Download Print this page

AEG FL182 Original Instructions Manual page 6

Advertisement

TECHNICAL DATA
Rated voltage
Luminous flux
Colour rendering index
Colour temperature
Beam angle
Output watts
Run time with one fully charged battery (1.5 Ah)
Run time with one fully charged battery (2.0 Ah)
Run time with one fully charged battery (2.5 Ah)
Run time with one fully charged battery (3.0 Ah)
Run time with one fully charged battery (4.0 Ah)
Run time with one fully charged battery (5.0 Ah)
Run time with one fully charged battery (6.0 Ah)
Run time with one fully charged battery (9.0 Ah)
Weight - not including battery pack
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
L1860R-X5
L1890R
Use AEG 18V battery and charger only
WARNING! Read all safety warnings, instructions, illustrations
and specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future reference.
SAFETY WARNINGS
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by
burning them. AEG Distributors offer to retrieve old batteries to protect
our environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Only use AEG batteries and chargers. Do not use battery packs from
other systems.
Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water. In case of eye contact rinse thoroughly
for at least 10 minutes and immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals and do not
stare into the light beam yourself (not even from a distance). Staring into
the light beam may result in serious injury or vision loss.
Don't use this tool in wet areas.
Do not stare at the operating light source.
6
LED TORCH
Compatible charger
(not included)
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The LED torch is intended to be used as a spotlight.
Do not use this product in any other way as stated for normal use.
BATTERIES
New battery packs reach full loading capacity after 4 - 5 chargings and
dischargings. Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the
battery pack. Avoid extended exposure to heat or sunshine (risk of
overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
6
FL182
18 V
300 lm
72
5500 k
7 degrees
4.5 W
6 hours
7.5 hours
9 hours
12.5 hours
16.5 hours
18.5 hours
23.5 hours
35.5 hours
0.35 kg

Advertisement

loading