Focal LISTEN WIRELESS Manual page 14

LISTEN WIRELESS®
WARNING:
• When connecting a 2
automatically disconnect from the 1
have to do subsequently is go into the Bluetooth
settings of the 1
• If you try to connect a ninth Bluetooth device to your
headphones, the foremost device will be replaced.
• To delete all devices in memory and return to the
initial settings (default volume) simultaneously press
and hold the "Bluetooth command" button and the
"Volume -" button. Once this has been done, Listen BT
will automatically go into pairing mode.
Turning on your headphones:
To turn on your headphones, flick the On/Off switch to
"On". The BT indicator light will flash blue. When using
your headphones for the first time, first read the paragraph
entitled "Pairing Listen BT to your Bluetooth devices".
Otherwise, the indicator light will flash slowly and Listen
BT will connect to the last device used. If no device is
detected, Listen BT will go into stand-by mode (< 1 min).
If Listen BT is connected to two Bluetooth devices, A and B
To listen to music from device B, whereas you were
previously using via device A: press pause on device A by
pressing the "Calls & Music command" or via device A, then
play the music on device B.
When you receive a call via device B, whereas you were
listening to music on device A, Listen BT will recognise the
call, pause the music and play the telephone's ringtone.
Simply press the "Calls & Music" button once to answer the
call, or press and hold the button to reject the call.
nd
device and select "Listen BT".
st
device, Listen BT will
device. All you
st
14