A Recorder And Satellite Receiver Or Cable Box With A/V Outputs - Philips 37PF9631D/37B User Manual

Connect a recorder and satellite receiver or Cable box with A/V outputs
CABLE
1
IN
CABLE BOX
1. Connect the satellite antenna cable or the Cable TV cable 1 to the satellite receiver's or cable
box's jack.
IN
2. Connect the AV cables 2 to the satellite receiver's or cable box's
recorder's jacks.
AV IN
3. Connect the Video, Audio Left and Right (only for stereo sound) recorder AV cables 4 to the
,
VIDEO AUDIO L
4. Connect another RF cable 3 from the output out of your recorder to the TV's input
CABLE/ANTENNA 75 Ω
5. Select the equipment you have connected in the Setup menu, Select your source, p. 20 and link
it to the connector you have connected your equipment to.
AV
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
the audio cables to the
When using the
S-VIDEO
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
42
AV3 DIGITAL
AUDIO OUT
L
S-VIDEO
R
VIDEO
AV1 / AV2 / AV3 :
L + R + VIDEO
OUT
2
and input or
R AV1, AV2
x jack.
and input jacks of
AUDIO L R
connector do not connect any device to the
AV2 AV1
Pr Pb Y Pr
AUDIO VIDEO AUDIO
L R L
4
IN OUT
RECORDER
AV OUT
jacks on the TV.
AV3
S-VIDEO
AV3.
Pb Y
VIDEO
R
ANTENNA
75
3
jacks and to the
input of and connect
AV3
jack;
AV3 VIDEO