Connect A Dvd Player, A Satellite Receiver Or Cable Box - Philips 32PF9641D/10 User Manual

Connect a DVD player, a satellite receiver or Cable box

EN
Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
EXT3 :
AUDIO L/R
DIGITAL AUDIO IN
CABLE
75
o
ANTENNA 75
4
50 50 50
Y Pb Pr
G B R
AUDIO L/R V H
EXT3
EXT2 EXT1
EXT3 :
YPbPr
o o o o
AUDIO OUT DIGITAL
L R
DISPLAY SYNCHRONIZED OUT AUDIO
DIGITAL
AUDIO
IN
DVD
Y Pb Pr
G B R
AUDIO L/R V H
EXT3
EXT2 EXT1
EXT3 :
AUDIO L/R
o o o o
AUDIO OUT DIGITAL
L R
DIGITAL AUDIO IN DISPLAY SYNCHRONIZED OUT AUDIO
DIGITAL
AUDIO
IN
5
SAT / STB
With Component Video Connectors
1. Connect the three separate component video
cables 1 to the YPbPr jacks on the DVD
player and to the Y, Pb and Pr jacks of
on the TV.
2. Connect the audio cable 2 to the digital out
of the equipment and to the
AUDIO IN
3. Select the equipment you have connected in
the Installation menu, Select your connections,
p. 33 and link it to
1 audio in in the same Connections menu.
4. In case of a DVD player with analogue audio,
connect the audio cable to the DVD's audio
and R jacks and to the
3.
EXT3
5. In case of a cable box and/or a satellite
receiver also connect the cable TV cable and/or
the satellite antenna cable 4 and the aerial
cable 5.
Notes:
- cables are often colour coded. Connect red to
red, white to white, etc..;
- the labels for the component video sockets may
differ depending on the DVD player connected.
Although the abbreviations may vary, the letters
B and R stand for the blue and red component
signals, respectively, and Y indicates the
luminance signal. Refer to the DVD player's
instructions for use for definitions and
EXT3 :
YPbPr
connection details;
- to get an optimal viewing, it is advised to switch
your equipment to the highest possible
supported display modes.
1
Warning: in case you notice scrolling images,
wrong colours or no colour, no picture, or even
combinations of these on your screen, verify if
the connections are done in the correct way and
if the resolution and the signal standard of the
connected equipment are set in the right way.
See the handbook for your equipment.
DIGITAL
connector of the TV.
EXT3 . Also select Digital
L/R AUDIO jack of
EXT3
L