Download
Share
Print this page
  1. Manuals
  2. Brands
  3. TOORX Manuals
  4. Elliptical Trainer
  5. ERX700
  6. Instruction

TOORX ERX700 Instruction

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION

Advertisement

loading
Need help?

Need help?

Do you have a question about the ERX700 and is the answer not in the manual?

Questions and answers

Related Manuals for TOORX ERX700

Summary of Contents for TOORX ERX700

  • Page 1 INSTRUCTION...
  • Page 2 TABLE OF CONTENTS Important Safety Instructions Important Operation Instructions Assembly Instructions Lubrication & Transport Folding & Unfolding Operation of Your Console Exploded View Diagram Parts List ATTENTION THIS ELLIPTICAL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.
  • Page 3 HARDWARE STEP 1 #97. 3/8" x 2-1/4" #88. 5/16" x 15mm Button Head Socket Bolt (6pcs) Hex Head Bolt (6pcs) #98. M5 x10 mm #115. 3/8" x7T #123. 3/8" x 19 x1.5T Phillips Head Screw (4pcs) Nyloc Nut (2pcs) Flat Washer (2pcs) #125.
  • Page 4 #132. Ø17 Wave Washer (2pcs) HARDWARE STEP 3 #89. 5/16" × 32m/m 3/8" × 1-1/2" #95. Hex Head Bolt (2pcs) Button Head Socket Bolt (1pcs) #115. 3/8" × 7T 3/8" × 2" #114. 5/16" × 7T #96. Nyloc Nut (2pcs) Nyloc Nut (2pcs) Button Head Socket Bolt (1pcs)

  • Page 5: Assembly Tools

    ASSEMBLY TOOLS #135. Combination M5 Allen Wrench & Phillips Head Screw Driver (1 pc) #136. 12m/m Wrench ( 1pc) #137. 13/14m/m Wrench ( 1pc) ASSEMBLY UNPACKING THE UNIT 1. 1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line.

  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS MAST ASSEMBLY 1. Locate the Console Mast (10) and Console Mast Cover (50) and slide the Cover onto the Mast as far as it will go. Make sure the Console Mast Cover (50) is facing the correct way. 2.
  • Page 8 HANDLE BAR ASSEMBLING 1. Put two Ø17_Wave Washers (132), Lower Handle Bar (L) (4) and Lower Handle Bar (R) (5) in order onto the shaft of Mast (10) and secure with two 5/16" × 15m/m_Hex Head Bolts (88) and two 5/16" × 23 × 1.5T_Flat Washers (125) by using 12m/m_Wrench (136).
  • Page 9 CONNECTING ARM ASSEMBLING 1. Use one 5/16" × 32m/m_Hex Head Bolt (89), 5/16" × 20 × 1.5T_Flat Washer (126) and 5/16" × 7T_Nyloc Nut (114) to secure the Rod End Bearing(26), which is at the end of Lower Handle Bar (L) (4), by using 13.14m/m_Wrench (137) and 12m/m_Wrench (136).
  • Page 10 Wrench & Phillips Head Screw Driver (135). PLASTICS PARTS ASSEMBLING 1. To assemble Connecting Arm Cover (L) (67) and Connecting Arm Cover (R) (68) onto Lower Handle Bars (4, 5) at each side, use four M5 × 15m/m_Phillips Head Screws (100) to secure by using Combination M5 Allen Wrench & Phillips Head Screw Driver (135).
  • Page 11 Wrench & Phillips Head Screw Driver (135). 5. Use one M5 × 15m/m_Phillips Head Screw (100) to secure Rear Stabilizer Cover (L) (70) on the Rail Tube with Combination M5 Allen Wrench & Phillips Head Screw Driver (135). Repeat the procedure for Rear Stabilizer Cover (R) (71) for the other side.
  • Page 12  LUBRICATION 1. Pour 2c.c of the lubricant under the middle of Rail. You must be pour lubricant each three months. 2. If the user felt the exercise is not smooth or there were some noise during exercising, please pour 2 c.c.of the lubricant on the middle of Rails. ...
  • Page 13 Folding Step1. 1 . Pull up the hook from Hook Fixing Block. 2. Grip Slide Wheel Cover with one hand, pull up the hook with the other and hook it on the notch of Hook Hanging Cap, as shown in the box. Step2.
  • Page 14 Step 3 1. Turn the Locking Knob counterclockwise. 2. Pull the knob outward to unlock. 3. Pull up Rail Assembly until locking it up on the knob then turn the knob clockwise until it is tight. Step 4. Finishing folding.
  • Page 15 Unfolding Step 1. 1. Turn the Locking Knob counterclockwise to release. 2. Pull the knob outward to unlock. 3. Unfold the Rail Assembly downward until locking the knob then turn the knob clockwise to tighten. Step 2 1. Hook it on the notch of the Hook hanging Cap as shown in the box. 2.
  • Page 16 Step 3 1.Hang the hook on Hook Fixing Block. 2.Grip the Slide Wheel Cover with one hand, pull up the Hook with the other to release the hook from the Hanging Cap and put down the Slide Wheel until it is on the Rail Assembly. Step 4.

  • Page 17: Operation Of Your Console

    OPERATION OF YOUR CONSOLE DISPLAY FUNCTIONS : ITEM DESCRIPTION TIME .Workout time displayed during exercise. .Range 0:00 ~ 99:59 SPEED .Workout speed displayed during exercise. .Range 0.0 ~ 99.9 KM(ML) / H DISTANCE .Workout distance displayed during exercise. .Range 0.0 ~ 99.9 KM/ML CALORIES .Burned calories during workout display.
  • Page 18 BEGINNER .4 PROGRAM selection. ADVANCE .4 PROGRAM selection. SPORTY .4 PROGRAM selection. WATT .WATT constant training mode. PROGRAM CARDIO .Target HR training mode. KEY FUNCTION: ITEM DESCRIPTION . Increase resistance level . Setting selection. . Decrease resistance level DOWN . Setting selection. MODE .

  • Page 19: Manual Mode

    Manual Mode Press START in main menu may start workout in manual mode. 1. Press UP or DOWN to select workout program, choose Manual and press Mode to enter. 2. Press UP or DOWN to preset TIME, DISTANCE, CALORIES, PULSE and press MODE to confirm. 3.
  • Page 20 Beginner Mode 1. Press UP or DOWN to select workout program, choose Beginner mode and press Mode to enter. 2. Press UP or DOWN to preset TIME. 3. Press START/STOP key to start workout. Press UP or DOWN to adjust load level. 4.
  • Page 21 4. Press START/STOP key to start or stop workout. Press RESET to reverse to main menu.
  • Page 22 Watt Mode 1. Press UP or DOWN to select workout program, choose WATT and press Mode to enter. 2. Press UP or DOWN to preset WATT target. (default: 120) 3. Press UP or DOWN to preset TIME. 4. Press START/STOP key to start workout. Press UP or DOWN to adjust Watt level.
  • Page 23 5. Error message: *The LCD displays “= = ” “ = =”–means not hand the grip or wear chest strap correctly. *E-1–There is no heart rate signal input detected. *E-4–Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50.
  • Page 24 Reminder: 1. When user stop pedaling for 4 minutes, computer will enter into power save mode, all setting and exercise data will stored until user start exercise again. 2. When console act abnormal, please plug out the adaptor and plug in again. 3.
  • Page 25 NOTE: 1. Once console is connect to phone/tablet via Bluetooth, the console will power off.
  • Page 26 EXPLODED VIEW DIAGRAM...

  • Page 27: Parts List

    PARTS LIST DESCRIPTION O'TY Main Frame Pedal Arm (L) Pedal Arm (R) Lower Handle Bar (L) Lower Handle Bar (R) Bushing Housing, Pedal Arm Connecting Arm (L) Connecting Arm (R) Cross Bar Console Mast Idler Wheel Assembly Crank Axle Rail Assembly Outer Slide Swing Arm (L) Swing Arm (R)
  • Page 28 DESCRIPTION O'TY Round Disk Round Disk Cover Cover Swing Arm Axle Pedal Arm Cover (L) Pedal Arm Cover (R) Pedal (L) Pedal (R) Slide Wheel Cover Button Head Plug Front Handle Bar Cover (L) Rear Handle Bar Cover (L) Front Handle Bar Cover (R) Rear Handle Bar Cover (R) Round Cap Connecting Arm Cover (L)
  • Page 29 5 × 25m/m_Tapping Screw...
  • Page 30 DESCRIPTION O'TY 4.8 × 38m/m_Sheet Metal Screw 3.5 × 16m/m_Sheet Metal Screw Ø3.5 × 12m/m_Sheet Metal Screw 5 × 16m/m_Tapping Screw Ø3 × 20m/m_Tapping Screw 3.5 × 16m/m_Tapping Screw Ø17_C Ring 1/4" × 8T_Nyloc Nut M8 × 7T_Nyloc Nut M8 × 9T_Nyloc Nut 5/16"...
  • Page 31 GARLANDO SPA Via Regione Piemonte, 32 - Zona Industriale D1 15068 - Pozzolo Formigaro (AL) - Italy www.toorx.it - info@toorx.it...