Philips 33PX8001/05 User Manual page 9

TV
VCR 1 TUNER
VCR 2 TAPE
a
SAT DCC
AMP CD
M
B
TV
OK
MENU
B
B
K K
a
0
L L
c
1 2 3
E
e
4 5 6
7 8 9
c
2
J 0
a
3
4
repeat
end
Direct selection of a TV channel
If you know the frequency, or the C- or S-channel number, it can be entered
directly with the digit keys on the remote control and in this way call up the
TV channel.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
4
Select Search with the keys
4
Enter the 3 digits of the desired frequency or the 2 digits in case of
C-or S-channels.
4
For frequencies under 100 MHz, first enter a 0. For example : 063.
5
The frequency is automatically finetuned.
Have you entered a wrong number ?
First complete the frequency or the channel number with arbitrary numbers and then
start again.
Go on to 3.
Enter the programme number
Now assign a number of your choice to the TV channel you have located. In
this way you decide the order of all your TV channels.
4
Select Programme Number with the keys
4
Select with the keys C or
number.
Go on to 4.
Store steps 1 to 3
Now the steps 1 to 3 must be stored in the memory.
4
Select Store with the keys
5
Stored appears briefly at the bottom of the screen.
5
The programme number and probably the programme name are stored in the
programme list after the message has disappeared.
If you want to store another TV channel.
4
Repeat & to '.
If you are connected to a cable system.
4
Begin immediately with é. You have already selected the TV system in &
for all channels.
If you have finished storing TV channels.
4
Press .
MENU
5
The
INSTALLATION MENU
V or W .
V W
or .
B or with the digit keys the desired programme
V or W and press OK.
reappears.
9