Table of Contents
Advertisement
Set/Change code
The Child lock feature (see TV, Features, p. 10)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be entered.
The Set/Change code menu item allows you to
create or change a Personal Identification
Number (PIN).
&
Select
Set/Change code
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
instructions on screen.
Source
Source
Setup
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
Decoder
Decoder
Setup
If a decoder or a descrambler is connected, see
p. 14, you can define one or more programme
numbers as decoder programme numbers.
&
Select
with the cursor right.
Decoder
é
Select
Programme
Demo
TV
Setup
Auto demo
Demo
......
Install
Dealer demo - Digital options
8
.
. Follow the
EXT1
EXT2
SIDE
Programme
Status
.
- Light sensor
- Comb filter
Important:You have forgotten your code !
&
Select
Change code
press
.
OK
é
Press the cursor right and enter the overriding
code 8-8-8-8.
"
Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Auto Surround
Sometimes the broadcaster transmits special
signals for Surround Sound encoded
programmes.
The TV automatically switches to the best
surround sound mode when
switched
.
On
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode, see
p. 3, and when you press the v key on the
remote control.
"
Select the programme number under which you
have stored the programme coming from your
decoder.
'
Select
.
Status
• Select the input used to connect your decoder:
,
or
None
EXT1
EXT2
• Select
None
if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select
when the decoder is connected to
EXT2
your EasyLink video recorder.
The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If
has been selected the demo will
Auto demo
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the Auto
demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note: The Dealer demo is not part of the automatic
sequence and can only be activated separately.
in the General menu and
Auto Surround
.
is
Hide quick links:
Advertisement
Table of Contents
