Technical specifications Infrared heater IHW with wide heat distribution, installation height 1.8 – 2.5 m Type E-nr (SE) EL-nr (NO) Heat Voltage (2) Amperage (3) Max. filament Length (5) Weight (6) output (1) temperature (4) [°C] [mm] [kg] IHW10 85 701 18 54 325 81 1000 230V~...
Page 6
Installation and operating instructions General Instructions Mounting Read these instructions carefully before IH is mounted on the wall using the bracket. installation and use. Keep this manual for The heater can also be mounted on e.g. future reference. a parasol or a post, a suitable U-bolt (not The product may only be used as set out in included) is used for this together with the the assembly and operating instructions.
Start up (E) Maintenance When the unit is used for the first time or When the unit is used for the first time or after a long period of disuse, smoke or odour after a long period of disuse, smoke or odour may result from dust or dirt that has collected may result from dust or dirt that has collected on the element.
Page 8
Safety • For all installations of electrically heated products should a residual current circuit breaker 300 mA for fire protection be used. • During operation the surfaces of the unit are hot! • The unit must not be fully or partially covered with inflammable materials, as overheating can result in a fire risk! •...
Page 9
Main offi ce Frico AB Tel: +46 31 336 86 00 Box 102 SE-433 22 Partille mailbox@frico.se Sweden www.frico.se For latest updated information and information about your local contact: www.frico.se...