Table of Contents
Advertisement
T6460/550/552EZ(EN)_EST.qx3
How to change a programmed
recording (TIMER)
1.
1.
Press
. The main menu will appear.
MENU
2.
2.
Select 'TIMER' with
Then press
FWD 1- B
3.
3.
Select ONCE, DAILY or WEEKLY recording
with
or
PLAY B-K
.
FWD 1- B
4.
4.
Select a TIMER block with
number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
5.
5.
Press
CLEAR
to delete information and input
correct information with
6.
6.
To end, press
STATUS/EXIT
7.
7.
Switch off with
STANDBY/ON y y
8. Other Functions
Changing the video (colour) system
If you playback recordings made on other video
recorders or you want to record from external
sources (via the scart socket), the automatic
video (colour) system switch-over may lead to
colour distortion.
You can switch off the automatic TV system
switch-over as follows.
Video (colour) systems
Other countries, other video (colour) systems:
In central Europe transmissions are broadcast
in the PAL system (Phase Alternation Line)
standard. France uses SECAM (Séquentiel à
mémoire). Middle East countries use ME-
SECAM (Middle East SECAM). In some coun-
tries (USA and Japan), TV viewers receive their
programmes as an NTSC signal (National
Television System Committee).
1.
1.
Press
on the remote control to
SYSTEM
select the TV (colour) system with the least
disruptions during playback.
Each pressing
SYSTEM
change cyclicaly; AUTO, ME-SECAM, PAL.
04.1.28
4:15 PM
or
.
PLAY B-K
STOP C-L
.
. Then press
STOP C-L
. (The flashing
0..9
.
0..9
.
.
, the display will
13
Page 13
Problems and solutions for pro-
grammed recordings
Cassette was ejected as soon as the
button was pressed
STANDBY/ON y y
• A cassette without the security tab was insert-
ed. Undo the erase protection (chapter
'Manual recording', section 'Preventing acci-
dental erasing') or insert a different cassette.
'TURN OFF YOUR TVCR FOR TIMER
RECORDING' flashes on the TV screen
• The TV-Video Combi is switched on several
minutes before the start of a programmed
recording. Switch off the TV-Video Combi with
. A programmed recording
STANDBY/ON y y
(timer) will only function when the TV-Video
Combi is switched off.
Cassette is ejected during recording
• The end of the tape was reached during recording.
The TV-Video Combi does not react
• While a programmed recording is being made,
you cannot operate your TV-Video Combi
manually. If you want to cancel the pro-
grammed recording, press
front panel.
AUTO
2.
2.
After 5 seconds, the OSD will disappear.
Switching the status display off or
on
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen. You can
switch off the information about the operating
status so that the status display is not recorded
when copying videocassettes.
1.
1.
Press
. The main menu will appear.
MENU
2.
2.
Select 'VCR SET UP' with
and confirm with
STOP C-L
on the
STOP/EJECT
or
PLAY B-K
.
FWD 1- B
EN
Advertisement
Table of Contents
