Table of Contents
Advertisement
2572.3 en
22-03-2007
To make video and audio connections (Continued)
Notes:
- Cables are often color-coded to connectors. Connect red to red, white to white....
- Component video (YPbPr) connection is necessary to view video sources, for example digital
broadcastings coming from a settop box, in 1080i, 720p, 480i or 480p;
- The labels for the component video sockets may differ depending on the DVD player or the device
connected. Although the abbreviations may vary, the letters B and R stand for the blue and red
component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player's or
devices instructions for use for definitions and connection details;
- This television is designed to accept high definition signal standards 480p, 720p and 1080i as specified
by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which
may cause difficulties for the television to properly display.
2
3
13:16
Pagina 45
Side panel overview
1
USB
2
3
1
Camera, Camcorder, Game
1. Connect your camera, camcorder or game
as shown.
2. Connect to
VIDEO
for mono equipment. For stereo equipment
also connect
AUDIO R
S-VHS quality with an S-VHS camcorder is
obtained by connecting the S-VHS cables
with the
S-VIDEO
inputs 3.
Warning: do not connect cable 1 and 2
at the same time.This may cause picture
USB
distortion !
Headphone
1. Insert the plug into the headphone socket
L as shown.
2. The headphone impedance must be
between 8 and 4000 Ohm.The headphone
socket has a 3.5 mm jack.
In the Sound menu select Headphone
volume to adjust the headphone volume.
Tip: Press ¬ on the remote control to
switch off the internal loudspeakers of the TV.
USB
See Multimedia browser, p. 41.
2 and
3
AUDIO L
3.
input 1 and
AUDIO
45
Advertisement
Table of Contents
