Table of Contents
Advertisement
2572.3 en
22-03-2007
How to search for and store TV channels (continued)
TV menu/Installation
Channels
Autoprogram
Installation updat..
Weak channel ins..
Installation mode
Uninstall channels
Info
TV menu/Installation
Installation mode
Antenna
Cable
Previous
Next
13:16
Pagina 31
Store TV channels
After language is set correctly, you can now search for and
store the TV channels.
Autoprogram
1. Select Channels and press the cursor right.
2. Select Autoprogram.
Start now
3. Press the cursor right.
4. Press the
5. Select Cable or Antenna in the Installation mode.
> When Antenna is selected, the TV will detect antenna
> When Cable is selected, the TV will detect cable
Note: Make sure that registration with your cable TV
provider and connection of equipment are completed.
Please select your
6. Press the green corresponding color button on the remote
installation mode.
control for "Next".
Note: All channels must be unlocked in order to
autoprogram. If requested, enter your PIN code to unlock
all channels. See Adjust Feature menu settings, p. 28.
7. Press the green corresponding color button on the remote
control for "Start" to start autoprogramming.
> The menu screen disappears and the progress of
> When Autoprogramming is complete, a message appears
8. Press the red color button to finish.
Notes:
• When you have locked TV channels while initiating
autoprogram, a message appears asking to enter your PIN code
in order to complete autoprogramming.
• When interrupted, the updated channel information is retained
as well as the not yet updated old channel information.
• Background autoprogramming occurs only when the TV is
turned on.
• Channel information of an ATSC channel is updated only for
the ATSC channel currently tuned.
• Once you have searched for as well the available Antenna as
well as the Cable TV channels, they are stored in the memory.
button.
OK
signals and will search for antenna TV (NTSC and ATSC)
channels available in your local area.
company supplied signals and will search for cable TV
(NTSC, ATSC, QAM modulated) channels available in
your area.
autoprogramming is displayed.
The progress bar indicates the number of analog and
digital TV channels found.
confirming the completion and the TV switches to the
first installed TV channel.
31
Advertisement
Table of Contents
