Philips 60PP9910/17B Basic Manual page 7

3
1-2-3 HDTV - 1 Getting Connected
C
Analog Cable Box with AV Output
1
Connect the incoming cable TV signal to a signal splitter (not sup-
plied).
The signal splitter enables you to avoid having to use the
TO TV jack on the back of the cable box. This jack will not supply
stereo sound to the TV.
2
Connect a coaxial cable to a connector on the signal split-
ter and to the CABLE jack on the TV and connect a coax-
ial cable to a connector on
CABLE IN jack on the back of the cable box.
3
Connect A/V cables to the VIDEO and AUDIO L and R outputs
on the back of the cable box and to the AV1 video (labeled
VIDEO) and audio (labeled L and R) jacks on the back of the TV.
the signal splitter and to the