Philips 60PP9910/17B Basic Manual page 19

15
Connections and Jacks
Tuner (RF) Input Jack
Cables used: RF coaxial cable (75Ω)
Allows you to connect an antenna, cable TV, or compo-
nents having RF outputs to the antenna input on the TV.
Signal Splitter
Allows you to route an antenna or cable TV
signal to two inputs.
300- to 75-ohm Twin-lead Adapter
Accepts twin-lead wires from an antenna and allows con-
nection to the antenna input on the TV. If your antenna is
already equipped with an RF coaxial cable you will not
need this adapter.
Analog and Digital Audio Jacks (Red and
White, Orange)
Cables used:Audio with RCA-type phono
plugs for analog and Coaxial Digtial
SPDIF for digital.
Provide sound for the video inputs. If your acces-
sory device has only one output for audio, connect
it to the left (color coded white) audio jack on the
TV.
HDTV B C
OOT AMP
Audio Jacks
Cables Used:
Audio with
RCA-type
Phono Plugs
Red White
Antenna RF Jack
Cable Used: RF
Coaxial (75Ω)
TUNER
Signal Splitter
Cables Used: RF
Coaxial (75Ω)
300- to 75-ohm
Twin-lead Adapter
TUNER
Audio Jacks
Cables Used:
Coaxial Digital
Audio (SPDIF)
COAX
R L
Orange