Draper 85655 User Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Trucks
  5. 85655
  6. User manual
Draper 85655 User Manual

Draper 85655 User Manual

Hand pallet truck
Hide thumbs Also See for 85655:
Table of Contents

Advertisement

Quick Links

Download this manual
HAND
PALLET TRUCK
85655
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 85655 and is the answer not in the manual?

Questions and answers

Related Manuals for Draper 85655

Summary of Contents for Draper 85655

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Copyright Notice

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS 1. TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS MANUAL ................2 1.4 COPYRIGHT NOTICE ....................2 2. CONTENTS 2.1 CONTENTS ........................3 3. GUARANTEE 3.1 GUARANTEE ....................... 4 4. INTRODUCTION 4.1 SCOPE......................... 5 4.2 SPECIFICATION ......................

  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.

  • Page 5: Introduction

    INTRODUCTION 4.1 SCOPE Ideal for use in warehouse environments. 4.2 SPECIFICATION Stock No........................... 85655 Part No..........................PT2500-B Lifting capacity ........................2500kg Maximum fork height ......................200mm Minimum fork height ......................... 85mm Fork length ........................... 1150mm Fork width (overall) ......................... 540mm Fork width (individual) ......................

  • Page 6: Health And Safety Information

    HEALTH AND SAFETY INFORMATION Have this tool repaired by a qualified person. This tool is designed to conform to the relevant international and local standards and as such should be maintained and repaired by someone qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use.
  • Page 7 HEALTH AND SAFETY INFORMATION Hydraulic fluid is a combustible material and in the event of fire should be extinguished using a foam or dry powder fire extinguisher. Do not use water. In the event of accidental release into the environment, measures to prevent spread must be adhered to.

  • Page 8: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION Handle. Release lever. Steering wheels. Pump assembly. Front wheels. - 8 -...

  • Page 9: Unpacking And Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the machine.

  • Page 10: Assembling The Pallet Truck

    ASSEMBLING THE PALLET TRUCK 8.1 ATTACH THE HANDLE TO THE PISTONS Axle with hole Offer the handle up to the Whilst holding the handle in Adjust the control lever to the piston’s pre-drilled holes. place slide the axle pin lower position. Then feed the through the handle.

  • Page 11: Pallet Truck Setup

    PALLET TRUCK SETUP 9.1 HYDRAULIC VALVE ADJUSTMENT: On the handle of your pallet truck, you will find the control lever, which can be regulated in three positions: Lower — Lever up, the lever moves back to the neutral, when released. Neutral —...

  • Page 12: Pallet Truck Instructions

    10. PALLET TRUCK INSTRUCTIONS Do not use this pallet truck unless you are trained and authorised to do so. Ensure the pallets used are suitable for use with the pallet truck. 10.1 LIFTING & LOWERING THE PALLET TRUCK: To lift the load, ensure that it is evenly distributed over both the forks and that the load to be lifted does not exceed 2500kg.

  • Page 13: Maintenance

    11. MAINTENANCE 11.1 MAINTENANCE Please check the oil level every 4 months. The oil capacity is about 0.3lt. Use the hydraulic type oil according to the temperature scale below. Temperature -20°C ~ +40°C Hydraulic oil EXPELLING AIR FROM THE PUMP UNIT Air may come into contact with the hydraulic oil because of transportation or pump in upset position.

  • Page 14: Troubleshooting

    12. TROUBLESHOOTING 12.1 TROUBLESHOOTING GUIDE Problems Possible cause Required action - The forks cannot be - Hydraulic oil is low. - Fill up the hydraulic oil. lifted up to the maximum height. - The forks cannot be - Fill up the hydraulic oil - No hydraulic oil.

  • Page 15: Disposal

    13. DISPOSAL 13.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – At the end of the useful life of the jack, drain off the oil and hand it over to an authorised agent and dispose of the jack in accordance with local regulations.
  • Page 16 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Table of Contents