Electrolux EPF09V1K8 User Manual page 6

6 www.electrolux.com
2.3 Features
Default Setting
When the air conditioner restarts after a
power failure, it will default to the factory
settings (AUTO mode, AUTO fan, 24°C
(76°F)). This may cause inconsistencies
on the remote control and unit panel. Use
your remote control to update the status.
Auto-Restart (some models)
In case of power failure, the system will
immediately stop. When power returns,
the Operation light on the indoor unit will
flash. To restart the unit, press the ON/
OFF button on the remote control. If the
system has an auto restart function, the
unit will restart using the same settings.
Louver Angle Memory Function
(Optional)
Some models are designed with a louver
angle memory function. When the unit
restarts after a power failure, the angle of
the horizontal louvers will automatically
return to the previous position. The angle
of the horizontal louver should not be
set too small as condensation may form
and drip into the machine. To reset the
louver, press the manual button, which
will reset the horizontal louver settings.
Refrigerant Leak Detection
System (some models)
In the event of a refrigerant leak, the LCD
screen will display "EC" and the LED
indicator light will flash.
2.4 Energy Saving Tips
• DO NOT set the unit to excessive
temperature levels.
• While cooling, close the curtains to
avoid direct sunlight.
• Doors and windows should be kept
closed to keep cool or warm air in the
room.
• DO NOT place objects near the air
inlet and outlet of the unit. This will
reduce the efficiency of the unit.
• Set a timer and use the built-in SLEEP/
ECONOMY mode if applicable.
• If you don't plan to use the unit for a
long time, remove the batteries from
the remote control.
• Clean the air filter every two weeks.
A dirty filter can reduce cooling or
heating efficiency.
• Adjust louvers properly and avoid
direct airflow.
Closing curtains during heating also
helps keep the heat in
Doors and windows should be
kept closed