Video Recorder; Other Equipment; To Select Connected Equipment; Sides Connections - Philips 29PT8609/12 User Manual

Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs.

Video recorder

CABLE
EXT 2
VCR

Other equipment

CABLE
Side connections
Amplifier
(only available on certain versions)
AUDIO
10
Carry out the connections shown opposite, using a good quality
euroconnector cable.
If your video recorder does not have a euroconnector socket, the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store, p. 5).
To reproduce the video recorder picture, press
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to EXT1,
and the equipment which produces the S-VHS signals (S-VHS and
Hi-8 video recorders, certain DVD drives) to EXT2 and all other
equipment to either EXT1 or EXT2.

To select connected equipment

µ
Press the key to select
from the EXT2 socket) and
panel.
Most equipment (decoder, video recorder) carries out the switching
itself.
Make the connections as shown opposite.
µ
With the key, select
For a mono set, connect the sound signal to the AUDIO L (or AUDIO
R) input.The sound automatically comes out of the left and right
speakers of the set.
Headphones
m
Press the key to mute the sound on the TV set (see also
sound settings, page 6).
The headphone impedance must be between 32 and 600 Ohms.
To connect to a hi-fi system, use an audio connection cable and
connect the "L" and "R" outputs on the TV set to the "AUDIO
IN" "L" and "R" input on your hi-fi amplifier.
0
.
, , (S-VHS signals
EXT1 EXT2 S-VHS2
for connections on the front
EXT3
.
EXT3