Pairing A New Smartphone - Car Solutions MimicsG4 User Manual

PAIRING A NEW SMARTPHONE

If you have already calibrated your touchscreen but decided to change your Smartphone, you will need to
do the following in order to use a new device (different device used when calibrating the touchscreen).
1. PRESS and HOLD the CAP button until you see the BLUE light start flashing, the mimics will now
reboot. At this point you will see the RED/BLUE light flashing left to right once per second (i.e.
Bluetooth discovery mode).
2. Now open the MimcisG4 app and press the "PAIR MIMICSG4" button and proceed with pairing
the mimics like you did when calibrating the touchscreen.
3. After the device is connected you are ready to use your new device.
* If after you pair a new device and the calibration seems incorrect, please repeat the "CALIBRATING THE
TOUCHSCREEN" step using your new device.
* Its highly recommended that you use the MimicsG4 app when initiating a "CALIBRATING THE
TOUCHSCREEN" or "PAIRING A NEW SMARTPHONE". Failure to do so can result in some app features not
to work and might cause pairing issues.
* After the initial pairing (first time discovery) the mimicsG4 will automatically reconnect to the
Smartphone when the MimicsG4 is turned on. Bluetooth will need to be enabled on your device for this to
automatically happen.
End of pairing Smartphone.
10