Changing The Dlna Programme List Of The Digibit R1; System Settings; Manual Reset - Telestar DIGIBIT R1 Operating Manual

5.5 System settings

The item „System" (see illustration 5) provides several functions for product mainte-
nance and administration:
Online firmware update:
If a new version of the software is available for your product, you can download it here.
The button „Update" will be active.
Local firmware update:
If you have connected a USB stick with a new version of software for your DIGIBIT R1,
and the update for some reason does not start automatically,You can start this manu-
ally here. Use the button „Select file" to select the folder of the storage medium connec-
ted (where your software files are saved), then click on the button „Update".
Change password:
Here you can change the default password set at the factory (admin) into any new
password of your choice. Enter the new password twice, confirm by clicking the button
„Change".
Sytem Restart:
In case of malfunctions, or where you have mistakenly entered incorrect parameters,
you can call up the default factory settings of your DIGIBIT R1 here. Note: individual
settings will be lost! Activate the restart by clicking the button „Restart". The restart of
the DIGIBIT R1 will take approx. 45 seconds.

5.6 Manual Reset

If the router should freeze, the DIGIBIT can be set back to the factory default setting
manually. To do this, please proceed as follows:
• Switch off the router
• Press the Reset button on the back panel of the router, using a sharp object (e.g.
a needle)
• Switch the router on, and keep the Reset button pressed down until the network
LED lights up once.
The router has now been set back to the factory setting, any software or programe list
updates must be reinstated.
10