Page 1
16K Multi-Window Splicing Processor LED Video Splicing & Processor Multi-window Splicer Processor —— English User Manual Multi-Window Splicing Processor www.amoonsky.com...
Page 2
Safety Instructions This symbol prompts the user, the device user manual has important operating and maintenance instructions. This symbol warns the user of the equipment inside the enclosure exposed to hazardous voltages, there is the risk of electric shock. Note Read the manual•...
Page 3
Statement This document is intended to help you understand and use the product. For accuracy and reliability, our company may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document.
1.Overview This is a high-end 4Kx2K@60Hz, powerful 8-channel multi-graphic multi-input splicing video processor, it can input four 4Kx2K video at the same time, and any 4Kx2K video can be arbitrarily zooming and roaming. It can meet ultra-high definition display requirements. The output supports customized resolution, single channel output support 2.65 megapixel and four channels output up to 21.2 megapixel.
2. Appearance 2.1 Front Panel »» LCD display — Display the menu and parameters of configuration. »» INPUT SOURCE — 1 AV, 1 VGA, 1 DVI、2 HDMI, 2DP、 SDI/USB(internal picture), Select the input source signal for current layer. ● The indicator light keep flashing if the selected input no signal. ●...
Page 7
● MIRROR – Rotate the current layer or mirror the image. ● SETUP WIZARD – Can directly enter the menu of splicing wizard through this key. ● BRI – The current layer brightness adjustment shortcut key, by clicking the button, the rotation knob can adjust the current layer brightness size.
2.2 Rear Panel »» Power Connector —IEC standard power cable ,input 100-240 VAC, 50 -60Hz. »» Input Connector ● AV — Composite video input, BNC connector, support PAL、PAL-M/N、NTSC、SECAM. ● DVI — DVI video input. DVI-I/DVI-D connector. support VESA standard video format. ●...
3. Menu Operations After startup, the OLED screen on the front panel is shown the default menu as below: Layer Source Splicer Layer A 1920x1080 60 Layer B 3840x2160 60 Layer C HDMI1 3840x2160 30 Layer D 1920x1080 60 In the default menu, press the knob to enter the main menu, press knob continue to enter the sub-menu, press return button to back to previous menu, rotate the knob left and right to choose wanted menu item.
3.1. Quick setup wizard Wizard function enables quick setup of product parameters and enhanced product usability. After the factory reset the wizard will pop up automatically or enable the wizard function from “” menu. Welcome to use wizard! Skip Start Cancel Enter the total horizontal and vertical resolution of the LED screen.
Page 11
Setp2, Splice Parameters Setting Setp2, Splice Parameters Setting Output Port DVI 2-1 Output Port DVI 2-4 Resolution 1920x1080@60Hz Resolution 1920x1080@60Hz Position_X Position_X 5760 Position_Y 1080 Position_Y Next Port Next Next Port Next Setp2, Splice Parameters Setting Setp2, Splice Parameters Setting Output Port DVI 2-2 Output Port...
3.2. Layer setup The multi-screen video splicing processor has 4 layers, and each layer can be configured with parameters such as input source, layer switch, position, size, rotation mode, and layer layout. The layers button is arrayed on the front panel. The layer must be selected before the operation, and the layer should be in the enabled status.
●Layer setting You can set various parameters for all layers, including layer on/off, layer flips, horizontal st art, vertical start, horizontal width, and vertical height. When the preset parameters do not meet the requirements, the parameters of each layer can be adjusted separately. Press the shortcut "Layer Settings" to enter the setup menu.
3.4. Splice It is recommended to use the splicing wizard to complete the splicing quickly. If the splicing wizard does not meet the user's needs, do the following. First step:Set the output resolution (Menu: Splice -> Resolution>>>) This resolution is set according to the one with the highest actual resolution among the 4 channels. For example, the actual output resolution is output 1: 1852x1216, output2: 1728x1216, output3: 2048x1216, output4: 1920x1216.
Need help?
Do you have a question about the AMS-SC16K and is the answer not in the manual?
Questions and answers