Page 1
Apex Lux Arcus Inset Electric Fire Please ensure you read both the Fire and the Fascia instructions before installation is started Installation and User Instructions Edition A 08/15 Please read all of the instructions carefully and retain for future reference.
Safety Instructions When using electrical appliances, basic safety precautions should always be followed. Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply. Children younger than 3 years old should be kept away from the appliance unless continuously supervised.
Page 3
Do not use this appliance in the immediate surroundings of a bath, a shower or swimming pool. Do not leave the appliance unattended whilst connected to the mains power supply or when in use. Do not remove from the mains power supply by pulling the cord; switch off and remove the plug by hand.
Page 4
Warning: In order to avoid overheating, do not cover the appliance. Warning: This appliance is not equipped with a device to control the room's temperature. Do not use this appliance in small rooms whilst occupied by persons incapable of leaving the room on their own, unless constant supervision is provided. Warning: Normal voltage is still present in this appliance as long as the appliance is connected to the electrical source.
Unpacking the Appliance Remove the appliance from the box and remove protective packaging from the appliance. Place the packaging inside the box and store or dispose of safely. Contents: Inset / Freestanding Electric Fire Fuel bed (coal, logs or twigs) Spacer pack Fixing pack Instruction Manual...
Page 6
Instructions for Use Advise. Before fitting Please retain all of the packaging until you have checked and counted all of the parts and the contents of the fixing pack against parts listed (in the Box). The fixing pack contains small items, which should be kept away from young children. It is suggested that all of the fixing pack content are placed into a container, to reduce the risk of losing any small pieces.
Page 7
Freestanding: The Inset Electric Fire can be placed in any location as a free-standing unit, as long as the Inset Electric Fire is kept approximately I MT clear from any combustible objects. Securing the Inset Electric Fire to a Fire Chamber Based on Minimum Dimensions STEP I: Ensure that the Inset Electric Fire is switched off and unplugged from the mains power supply.
FITTING THE DECORATIVE FRAME The appliance is supplied with a decorative frame, the frame attaches to the firebox as a three piece or one piece clip-on unit. Place the magnets supplied to the outer frame of the fire box. A plastic protective coating may be applied to the face of the frame assembly, which should be removed at this stage;...
Need help?
Do you have a question about the Lux Arcus and is the answer not in the manual?
Questions and answers