Protocol-Specific Parameters - Avaya Vantage Installing And Administering

Parameter
PHNMOREEMER
GNUMS

Protocol-specific parameters

Certificates configuration parameters
Parameter
TRUSTCERTS
MYCERTURL
May 2018
Type Default Is set to
value default
on reset
String Null Yes
list string
Type Default Is set to
value default
on reset
String null Yes
string
String null Yes
string
Installing and Administering Avaya Vantage
Comments on this document? infodev@avaya.com
Other operational parameters and settings
Description
Specifies additional emergency numbers.
The value of the parameter is a list of emergency
numbers separated by commas without any spaces
between entries. The parameter value can contain
up to 100 numbers. Each number can contain up to
30 characters. You can use 0–9, *, and #
characters.
This parameter is not supported in the non Avaya
™
Breeze CSDK application based mode.
For provisioning, use PPM.
Description
Specifies file names of trusted certificates which are
used for authentication.
If you are providing several file names, use commas
to separate them. You can upload up to 100 trusted
certificates on Avaya Vantage
length of the parameter value is 1024 symbols.
™
Avaya Vantage supports both the PEM and DER
file formats.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
Specifies a URL of the Simple Certificate
Enrollment Protocol (SCEP) server. Avaya
™
Vantage attempts to contact the server if the
parameter value is not default.
A valid URL must start with http://.
This parameter is supported in all modes.
For provisioning, use the SET command in the
46xxsettings.txt file.
™
™
. The maximum
Table continues...
125