Using Your Mixer - Hi-Tech Titan 0805 Instruction Manual

BEFORE USING MIXER
Remove any packages, disassemble any detachable parts.
Clean the dough hooks and beaters. Before assembling the
mixer, make sure the power cord is unplugged from the
power outlet and the speed selector is at the "0" position.

USING YOUR MIXER

1. Assemble proper beaters or dough hooks into mixer.
NOTE: Beaters can be inserted in either socket, as the
beaters are identical. For dough hooks, the one with
washer can only be inserted into the bigger socket and the
other one can only be inserted into smaller one. The two
dough hooks can not be inserted in reverse.
2. Ensure that the unit is at the "0" setting, then plug in the
power source.
3. Set the speed selector to your desired speed. There are
5 speed settings to be selected. When kneading yeast
dough, suggesting to select the speed selector by lower
speed and then by higher speed to achieve the best
results. The mixer will run at the highest speed when
pressing turbo button.
WARNING: Do not stick knife, metal spoons, fork and so
on into bowl while operating.
4. The max operation time per time shall not exceed 4
minutes. Minimum 20 minutes rest time must be
maintained between continuous two cycles.
NOTE: During operation you may rotate the bowl with
hand to achieve the best results.
5. When mixing is complete, turn the speed selector to "0"
4