Declaration Of Conformity; Declaration Of Origin - Vision TM-ST2 Owner's Manual

DECLARATION OF CONFORMITY

Where applicable Vision products are certified and comply with all known local regulations to a
'CB Certification' standard. Vision commits to ensure all products are fully compliant with all
applicable certification standards for sale in the EU and other participating countries.
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned
to the place of purchase at the end of its useful life for recycling.
WARNINGS
During installation take care to adhere to workplace health and safety laws:
• Attach this product to a rated load-bearing structure.
NEVER MOUNT BRACKET DIRECTLY TO A FALSE CEILING!
• Do not cut or drill any parts above head height. This should all be done using the correct
safety equipment at floor level.
• Avoid overstretching which might result in the ladder tipping over.
• SWL (safe working load): 10kg
• Ensure it is installed in an appropriate place – for example not obstructing an emergency exit.
• Ensure it is at least 2000mm above the ground to prevent accidental injury.
• Check stability after installation.
• Installation must be done by a specialist audio-visual installer
• Allow 500mm x 500mm space around the bracket.
• Avoid installing in a moist environment, or in direct sunshine, or near corrosive gas or liquid.
• Routing of cables through the bracket must comply with local regulations.
ENSURE POWER CABLE IS NOT TWISTED, SQUEEZED, OR SHEARED!
All products are designed and imported into the EU by 'Vision' who is wholly owned by 'Azlan
Logistics Ltd.', Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park,
Clifton Moor, York, YO30 4GH. WEEE Registration: GD0046SY

DECLARATION OF ORIGIN

All Vision products are made in the People's Republic of China (PRC).
2
TM-ST2_manual_en.doc