Basic Operation - KSNTEK KSN55-C Series User Manual

：
CONNECTIONS
a. Wi-Fi: SSID
Protocol: TCP；Host IP:
b. Bluetooth： Bluetooth Spp name:
c. USB: Install USB driver for PC or Mac then find COM port No. on device manager
Note: For some of App on iOS already fixed connection settings, like in SEAiq just find the
"KSNTEK KSN11-C ROT....." in Standard WiFi Devices then Enable on it.

BASIC OPERATION

SHIP AIS PILOT PLUG MODE:
Default output data on unit are: GNSS,ROT,AIS Receiver on NMEA sentence,user can make them
OFF in unit MENU to let it worked with ship's AIS Pilot Plug, it will repeat ship's data after both
OFF.
Recommend setting:
SOG,COG,HEADING from ship and ROT from KSN55-C(Make the GPS OFF in unit MENU)
Note: Own AIS receiver will OFF automatic after AIS cable connected to ship,so it can at ON
always.
INDEPENDENT AIS MODE:
This mode is for backup normally when ship navigations are not working.
The GPS,ROT,AIS,HDT should be ON in unit MENU,Heading value must be initiated in the web
page "192.168.2.1/ksntek.html' CAL option.
Note: ROT CALIBRATION will requested if it opened whatever ship mode or own ,HDT not
recommend to use for the moment.
name：KSN55-C；Password：12345678
KSNTEK-BT(only for computer not
：
WWW.KSNTEK.COM
192.168.2.1；Port：8888
KSN55-C SERIES USER MANUAL
iOS)