!! WARNING !!
MAKE SURE THAT ALL POWER HAS BEEN REMOVED FROM
THE MACHINE BEFORE ATTEMPTING TO INSTALL ANY
HARDWARE OR CABLING!
Preparation
Disconnect the laundry machine from all power sources
before performing any of the following steps.
Only perform the following steps after the WaveReader
has been physically installed in the machine.
1
Carefully remove card label decal using
small flat head screw driver.
Discard Decal.
www.heartlandMicroPayments.com
www.heartlandMicroPayments.com
5
5
Need help?
Do you have a question about the GCW1069CS and is the answer not in the manual?