HiB Vibe Quick Start Manual

HiB Vibe Quick Start Manual

Bluetooth mirrors

Advertisement

Quick Links

Bluetooth
Mirrors
tm
Pulse
Art No. 77415000
Vibe
Art No. 77414000
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to ensure that
your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall.
NB. These products must be installed with a minimum distance of 150mm
between the infra-red sensor switch and any surface or object to ensure
correct operation of the sensor.
Min. 150mm
FI#01 003 R150909
- Ver No.
1.0 Jan 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vibe and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HiB Vibe

  • Page 1 Vibe Art No. 77414000 Thank you for purchasing this HiB product. Please read through these instructions carefully and refer back to them during installation to ensure that your product is fitted safely and that it retains its high quality finish.
  • Page 2 REAR VIEW REAR VIEW mounting points mounting points Vibe: Art No. 77414000 Pulse: Art No. 77415000 Rear View Fig. A Installation to which the mirror is being connected is turned off. Feed the domestic mains supply Position the mirror in a suitable location wire through the grommet on the mirror frame.
  • Page 3 • To activate the Bluetooth , wave hand under the To preserve the high quality finish of your HiB product, sensor switch located at the bottom of the mirror please ensure you regard the following care and (see figure B). The mirror will give out a tone to cleaning recommendations: confirm it is ready for pairing.
  • Page 4 ©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.

This manual is also suitable for:

Pulse

Table of Contents