Ferroli SUN G 30/2 PRO Installation And Maintenance Manual page 35

CHOKE ELECTRODES
After removing the cover, detach the
high-tension cables from the transfor-
mer side, remove the photo resistance
1, unscrew the connector 2 that hooks
the fuel line to the choke 3, loosen the
screws 4 and, turning the flange anti-
clockwise, remove the flange-choke-
deflectorelectrode assembly.
Remove the screws 5, in order to remove the deflector, and the screws 6 to remove the elec-
trodes. The choke may be cleaned adequately by removing the filter and cleaning inside the
spray nozzle and jet with gasoline and a light oil rinse. Re-assemble all parts carefully with
special attention to the positioning of the electrodesdeflector.
ELECTRODES - DEFLECTOR SETTING
After having installed the nozzle, check
the correct position of the electrodes and
deflector according to the following levels.
It is adviseable to check levels after every
intervention on head.
8÷9
4÷5
4
FAN
WARNING:In the event of replacement or
assembly/disassembly of the fan, make
sure that the latter does not touch the
motor platform as illustrated in the inclosed
diagram.
3,5÷4
7÷7,5
1 3 2
6
5
UK
35