Table of Contents
Advertisement
ASSEMBLY & USE
Ensure that the plunger head is protruding from the
1.
outer tube.
If not, spin the bristle head while pushing on the
plunger until it protrudes.
Fully insert the spring into the outer tube until the
2.
plunger is fully extended.
Screw the outer tube into the base plate.
3.
Twist the base plate clockwise until it snaps into the
4.
basin.
Fill the basin with warm water and a few drops of
5.
your preferred dish soap.
Place bottle over the plunger head and fully depress
6.
3-4 times or until all residue is removed. (If water
does not immediately eject from the plunger you may
need a few initial priming pumps to remove the air.)
3
Advertisement
Table of Contents
